河东智能 Current page: Home >Products >KNX
Products
KNX 4CH 7A RGBW Driver
KNX 4CH 7A RGBW Driver
KNX 4CH 7A RGBW Driver
KNX 4CH 7A RGBW Driver
KNX 4CH 7A RGBW Driver

KNX 4CH 7A RGBW Driver

model:M/DRGBW4.1

KNX 4CH 7A RGBW Driver has 4 RGBW driving channels, each channel has the output capacity of 7A.The four channels can be controlled separately or using RGBW combination control. PWM linear dimming can set the dimming response time and the upper and lower limits of the dimming. The dimming is stable and diversified to meet the needs of different occasions.

KNX 4CH 7A RGBW Driver
KNX 4CH 7A RGBW Driver
KNX 4CH 7A RGBW Driver
KNX 4CH 7A RGBW Driver
KNX 4CH 7A RGBW Driver

KNX 4CH 7A RGBW Driver has 4 RGBW driving channels, each channel has the output

capacity of 7A.The four channels can be controlled separately or using RGBW combination control. PWM linear dimming can set the dimming response time and the upper and lower limits of the dimming. The dimming is stable and diversified to meet the needs of different occasions.


■ PWM liner dimming
■ Dimming lower / upper limit setting
■ Dimming fade time setting
■ 1 bit switch state response
■ 1 byte brightness state response
■ 3 bytes RGB color response *
■ State recovery after power on
■ Staircase light
■ Flashing light
■ Scene function (10 scenes supported for each channel)
■ Logic function
■ Threshold value
■ Up to 5 sequences, with 24 steps for each
■ Custom on/off *
■ Color selection and transformation for combination mode *
■ The polarity protection function of DC power supply will prevent from destroy the device when the positive and negative electrodes are connected in reverse.
Note: * Only for RGBW combination mode.


Basic Parameters
Working voltage 21~30V DC
Working current 10mA/30V DC
Communication KNX/EIB
Output type Constant voltage PWM output
Output channel R, G, B,W 4channels
Output current 7A/CH (total 28A)
LED type Common anode RGBW LED strip or single LED
Cable diameter of KNX terminal 0.6-0.8mm

Input power (for LED) 12~40V DC


External Environment
Working temperature -5℃~45℃
Working relative humidity ≤90%
Storage temperature -20℃~60℃

Storage relative humidity ≤93%


Specifications
Dimensions 183mm×84mm×39mm
Net weight 212g
Housing material ABS, PC, Aluminum
Installation Fixed with screws
Protection rating (Compliant with EN 60529) IP20

Feel free to contact us
If you have any questions about products or project planning,
please fill out the form. We're ready to receive your message.
Send
Terms of Service
Welcome to be a member of HDL Automation Co., Ltd. (HDL) website. By the registration of our site, you are agreeing to comply with and be bound by the following Terms of Use. The terms constitute the agreement between you and HDL relating to your registration and the use of all activities of HDL website.

1. For the better service, members should vouch that data supplied on registration are true and complete, and be responsible for all the consequences of false information.

2. To protect your account, keep your password confidential. You are responsible for the activities that happen on or through your HDL account.

3. If you agree to the Terms of Use, HDL and the website may use your data supplied when providing technique or other services and you may receive email messages from HDL. If necessary, HDL may contact you through your personal information.

HDL Automation Co., Ltd. reserves the right to the final explanation of the Terms of Use.