please fill out the form. We're ready to receive your message.
KNX-RS485 Interface Mini is a small module that used for bidirectional data exchange between KNX and RS485. Accordingly, the module has two interfaces, RS485 and KNX. Its small size makes it easy to install and greatly increases space utilization.
KNX- RS485 Interface Mini is a small module that used for bidirectional data exchange between KNX and RS485. Accordingly, the module has two interfaces, RS485 and KNX. Its small size makes it easy to install and greatly increases space utilization.
■ 3 working modes: String mode, Hexadecimal mode, Data mode
■ Baud rates: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200bps. Users can choose baud rates
according to their requirements.
■ Gateway between KNX and RS485: RS485 (string mode or hexadecimal mode, data mode) <-> KNX/EIB.
■ Supports up to 200 control targets
■ Up to 200 characters for each target (varies from different targets)
■ 24 sequences supported
Basic Parameters
Working voltage 21~30V DC
Working current 10mA/30V DC
Communication KNX, RS485
Data bit 7 bits, 8 bits, 9 bits
Stop bit 0.5 bit, 1 bit, 1.5 bits, 2 bits
Cable diameter of KNX terminal 0.6 – 0.8mm
External Environment
Working temperature -5℃~45℃
Working relative humidity ≤90%
Storage temperature -20℃~60℃
Storage relative humidity ≤93%
Specifications
Dimensions
KNX-RS485 Interface Mini: 45mm×46mm×18mm
Base: 90mm×64mm×27mm
Net weight
KNX-RS485 Interface Mini: 25g
Base: 44g
Housing material
KNX-RS485 Interface Mini: Flame retardant PC+ABS
Base: Flame retardant PA66
Installation
Wall box installation
35mm DIN rail installation
Protection rating (Compliant with EN 60529) IP20
KNX 960mA Power Supply Module is fully compliant with European safety standards and KNX standard protocol. It can provide up to 960mA current to KNX/EIB bus.
KNX Line Coupler can be used as a line coupler or repeater (for address extension), which can be connected to a main line and a sub line when the device works as a line coupler. A separate power supply including a chock is required for each new line segment and each line will be electrically isolated. Through the line coupler, packet filtering can be carried out between the two lines, reducing the amount of telegrams, preventing interference, and maintaining efficient communication.
KNX USB Interface is a KNX system device with a USB interface that establishes bidirectional data transfer between the computer and the KNX Bus. The KNX USB Interface supports operations, for example, KNX address management, application parameter management, and KNX Bus device diagnostics. The device is used in conjunction with ETS and standard KNX software.