please fill out the form. We're ready to receive your message.
HDL Bus Enable Hotel I/O Module supports functions of MOSFET dimming, relay, curtain control, dry contact, doorbell control and LED output. The three service status indicators of the indoor doorbell can be controlled by the universal switch of the panel. The output channel parameters are set by HDL Buspro Setup Tool, and curtains, lamps, exhaust fans, etc. can be set as controlled targets. After setting, the targets can be controlled via the panel.
HDL Bus Enable Hotel I/O Module supports functions of MOSFET dimming, relay, curtain control, dry contact, doorbell control and LED output. The three service status indicators of the indoor doorbell can be controlled by the universal switch of the panel. The output channel parameters are set by HDL Buspro Setup Tool, and curtains, lamps, exhaust fans, etc. can be set as controlled targets. After setting, the targets can be controlled via the panel.
■ Channel 9 and 10, 11 and 12 can be used for curtain control.
Communication HDL Buspro
Storage relative humidity ≤93%
MOSFET Dimming Actuator is designed based on the MOSFET dimming technology, which has 3 kinds(2CH 3A / 4CH 1.5A / 6CH 1.5A) of output channels and each channel has a bypass button for manual control. MOSFET trailing edge dimming mode supported for each channel, which is applicable to dimming control of different types, for example, incandescent light, halogen light, dimmable LED light, dimmable LED driver, etc.
6CH 2A Leading Edge Dimming Actuator supports AC220V and AC110V power input. It has 6 output channels and each channel has a bypass button for manual control. Fuse protection is available for each channel, so that the dimmer will be protected in case of short circuit. LED indicators are available for indicating whether a short circuit occurs in the channel.
KNX MOSFET Dimming Actuator has 3 types (2CH 3A, 4CH 1.5A, and 6CH 1.5A) of output circuits, which supports multiple application functions. This series of dimming actuators are in full compliance with European Safety Standards and KNX standard protocol.