河东智能 Current page: Home >Products >KNX
Products
KNX Curtain Motor with Adapter( 220V AC)
KNX Curtain Motor with Adapter( 220V AC)
KNX Curtain Motor with Adapter( 220V AC)
KNX Curtain Motor with Adapter( 220V AC)

KNX Curtain Motor with Adapter( 220V AC)

model:M/S410.1

KNX Curtain Motor 220V AC / KNX Curtain Motor with Adapter is a curtain controller controlled by a KNX panel or other KNX device. The motor can be widely used at home, office, hospital and hotel etc.

KNX Curtain Motor with Adapter( 220V AC)
KNX Curtain Motor with Adapter( 220V AC)
KNX Curtain Motor with Adapter( 220V AC)
KNX Curtain Motor with Adapter( 220V AC)
KNX Curtain Motor 220V AC / KNX Curtain Motor with Adapter is a curtain controller controlled by a KNX panel or other KNX device. The motor can be widely used at home, office, hospital and hotel etc.

■ Automatic travel measurement and supports limit point presetting
■ Enable to open, close, stop and percentage open/close, and supports status response (open, close, stop, percentage open/close, etc.)
■ Enable short drag to start the motor
■ The rotate direction of the motor can be set to forward or reverse.
■ Preset position function, a total of 4 preset positions available
■ Safety control: Control the curtain position according to wind, rain, frost signal, and supports the power-on status recovery after power failure.
■ Auto control: Control the curtain position according to the weather status, heating, cooling signal
■ Scene control function
■ Forced position operation
■ Power-down save function



Basic Parameters
Working voltage 21-30V DC
Working current 6mA/30V DC
Rated input voltage
KNX Curtain Motor 220V AC
AC100-240V (50/60Hz)
KNX Curtain Motor with Adapter
24V DC
Rated input current
KNX Curtain Motor 220V AC: 0.4A
KNX Curtain Motor with Adapter: 1.5A
Communication KNX
Cable diameter of KNX terminal 0.6-0.8mm
Motor rotate torque 1.2N.m

Motor rotate speed 95rpm


External Environment
Working temperature -5℃~45℃
Working relative humidity ≤90%
Storage temperature -20℃~60℃

Storage relative humidity ≤93%


Specifications
Dimensions 283×71×50.6(mm)
Net weight
KNX Curtain Motor 220V AC: 976g
KNX Curtain Motor with Adapter: 874g
Housing material PC, aluminum
Installation Wall hanging
Protection rating (Compliant with EN 60529) IP41



Feel free to contact us
If you have any questions about products or project planning,
please fill out the form. We're ready to receive your message.
Send
Terms of Service
Welcome to be a member of HDL Automation Co., Ltd. (HDL) website. By the registration of our site, you are agreeing to comply with and be bound by the following Terms of Use. The terms constitute the agreement between you and HDL relating to your registration and the use of all activities of HDL website.

1. For the better service, members should vouch that data supplied on registration are true and complete, and be responsible for all the consequences of false information.

2. To protect your account, keep your password confidential. You are responsible for the activities that happen on or through your HDL account.

3. If you agree to the Terms of Use, HDL and the website may use your data supplied when providing technique or other services and you may receive email messages from HDL. If necessary, HDL may contact you through your personal information.

HDL Automation Co., Ltd. reserves the right to the final explanation of the Terms of Use.